How to set up auto login for injections?
If you want to re-push leads in a more advanced way by emulating the auto login action via both manual and auto injectors, you may consider setting up the corresponding section.
Let us describe how to configure it properly:
In the manual or auto injection creating window, scroll down to the “Auto Login” section.
Here, specify the following:
Enable Auto Login – select “Yes”.
By default, a simple mode with only auto login executing is applied. No pixels and other actions will be triggered (as it does not imitate a real user behavior, such action can fail to pass even basic human verification if any, meaning that the lead is less likely to be registered).
Note: If you want to simulate a real user behavior (e.g., to open a web browser, make some clicks to increase chances to pass basic verification if any) for the lead is more likely to be registered, contact our support team.
Enable IP Simulation – define if you want a re-pushed lead's IP address to be the same as its autologin IP address.
No – re-pushed lead IP and its autologin IP will be different.
Yes – re-pushed lead IP and its autologin IP addresses will be the same.
To enable the simulation, you need to fill in the additional fields:
Proxy Provider – select a proxy provider which enables IP simulation.
User Name – enter your username for the proxy provider selected.
Password – enter your password for the proxy provider selected.
Additionally, you can check if your proxy provider works properly for the required country or not to ensure the autologin link is executed successfully.
To do that, select a specific country to check your proxy for, once you have entered your proxy provider credentials.
If the check is performed successfully (meaning that the proxy works correctly), the corresponding message appears:
Also, you may find the proxy IP address when clicking “More”.
If the proxy does not work for this country, an error message appears:
Important: In this case, you are advised to contact your proxy provider to resolve the issue.